HUMAN SENSOR WAH

HUMAN SENSOR WAH


Equipped with LOW NOISE J-FETS


The Human Sensor Wah allows fast and linear modulation of the effect, without the use of potentiometers or mechanical parts subjected to wear. This is achiveable thanks to a last-generation sensor, through which is possible to detect the position of the foot in a stable and precise way.
The filter technology based on J-FET transistors makes the sound warm and unique, while the ability to choose in real-time between VINTAGE mode and MODERN mode (by stomp switch), increases the unparalleled expressive power of this effect.

Technical Specifications

Passband bandwidth:

Input impedance:
Output impedance:
Maximum output signal:
Distortion:

Noise:

Bypass:
Power supply:

Power consumption:


Protections:

Chassis:
Weight:
Size:

350Hz – 1650Hz in VINTAGE mode
420Hz – 2000Hz in MODERN mode
470kΩ
1kΩ
12V RMS over 10kΩ center frequency with 1V RMS on input
1% Thd 5V RMS over 10kΩ on output
5% Thd 10V RMS over 10kΩ on output
20nV/√Hz at 350Hz (VINTAGE) or 420Hz (MODERN)
32nV/√Hz at 1650Hz (VINTAGE) or 2000Hz (MODERN)
True bypass
External power supply 9V-15V DC (included in the box)
Battery 9V (not included)
100mA max at 15V when switched on
20mA at 9V when switched on
4mA at 9V while in bypass
Against overvoltage up to 60V RMS on input
Against reverse polarity
Stainless steel AISI430, thickness 1.5mm
1200g, 2.6lbs
259mm (318mm with footrest support) x 90mm x 46mm
10.2 (12.5 with footrest support) x 3.5 x 1.8 inches

Eleven Electrix Human Sensor Wah Technical Support